Introduction of High Quality Angle Valve

Introduction of High Quality Angle Valve

High Quality Angle valves are angle globe valves. Good Angle valves are similar to spherical valves, and their structure and characteristics are modified from spherical valves. The difference from the spherical valve is that the outlet of the angle valve is at a 90-degree right angle to the inlet. Best Angle valve is also called triangle valve, angle valve, angle water valve. This is because the pipe forms a 90-degree corner at the angle valve, so it is called angle valve, angle valve, and angle water valve.

1. Civilian use
The angle valve mainly plays four roles:

Connect the inner and outer water outlets;
If the water pressure is too high, you can adjust it on the triangle valve and turn it down a little;

The function of the switch, if the faucet leaks, etc., you can turn off the triangular valve instead of the main valve at home;
Beautiful and generous. Therefore, general new house decoration is an essential plumbing accessory, so designers will also mention it when decorating a new house.
2. Industrial use
The valve body of the angle valve has three ports: water inlet, water volume control port and water outlet, so it is called a triangle valve.
Of course, the angle valve is constantly improving. Although there are still three ports, there are also angle valves that are not angled.
The angle valve referred to in the industry: the angle control valve is similar in structure to the straight-through single-seat control valve except that the valve body is a right angle.